MyFloridaCode.com

P2709.2 Lining required.
The adjoining walls and floor framing, enclosing on-site built-up shower receptors shall be lined with sheet lead, copper or a plastic liner material that complies with ASTM D 4068. The lining material shall extend not less than 3 inches (76 mm) beyond or around the rough jambs and not less than 3 inches (76 mm) above finished thresholds. Hot mopping shall be permitted in accordance with Section P2709.2.1.
Exception:
1.	Floor surfaces under showerheads provided for rinsing laid directly on the ground.
2.	Shower compartments where the finished shower drain is depressed a minimum of 2 inches (51 mm) below the surrounding finished floor on the first floor level and the shower recess is poured integrally with the adjoining floor.

>>> "Jeanette McCants" <jmccants6 at tampabay.rr.com> 3/2/2009 11:49 AM >>>
Is there any building codes for installing shower liners in the upstairs
showers?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://myfloridacode.com/pipermail/codetalk/attachments/20090302/217dad91/attachment.html 
_______________________________________________
CodeTalk mailing list
CodeTalk at myfloridacode.com 
Unsubscribe or change your options at:
http://myfloridacode.com/mailman/listinfo/codetalk